XR-100是一種活性100%的多官能交聯劑，按0.5-3.0%加入水性丙稀酸乳液或聚氨脂分散液中，對其耐水、耐化學品、耐高溫及在特殊底材上的附著力都有明顯的改善。 性狀： 外觀 淡黃色清澈液體 固含量(1％W/W) >99％ 粘度(25度) 180- 200mpas 密度(20度) 1.08kg/L 耐水洗(25度) >100％ 穩定性(25度) >100% 十二個月使用方法： 1、 一般情況下，交聯一般漿料中只需要加0.5-3%(以重量計算)XR一100即可 。 2、 XR一100有**的混溶性，使用前加入漿料中用手攪拌均勻即可使用。 3、 交聯劑加漿料中會慢慢水解，混合物應在1-3天內用完。 4、 如混合物存放時間過長就會出現： A）、慢慢失效； B）、漿料內體系粘度趨于升高并可能形成凝膠； C）、過后另外添加一定量的XR一100可使交聯反應得以恢復； *終用途： 1、 廣泛用于各種印花膠漿，水漿/邦漿，用量為0.5-3%（以重量計算） 2、 可以普遍提高印花漿料在無孔底材上的附著力，增強漿料的耐性。 3、 明顯提高印花涂層的洗水牢度，防粘效果和耐高溫。 特點： 1、 XR一100交聯劑用于印花漿料上對提高牢度，耐水洗及防粘效果方面是其它固色劑的3一5倍。 2、 用同樣的工藝與漿料做一片尼龍或化纖布上的印花。試用1%XR一100加入漿料印好花位。同時再用3%的其它固色劑印另外一底布上，干燥壓燙后，做各種防粘性，牢固度等測試，你會發現用XR一100后會發現用XR-100的效果是其他固色劑的3-5倍。 XR-100 is an active 100% polyfunctional cross-linking agent, according to 0.5-3.0% adding waterborne acrylic acid latex or polyurethane dispersions, the water resistance, chemical resistance, high temperature resistance and in particular the substrate adhesion are improved obviously. Character.Appearance light yellow clear liquidSolid content ( 1%W / W ) > 99%Viscosity ( 25 degrees ) 180 - 200mpasDensity ( 20 degrees ) 1.08kg / LWashable ( 25 degrees ) > 100%Stability ( 25 degrees ) > 100%Twelve months using the method:1, in general, cross-linking general slurry need only 0.5-3% ( by weight ) of XR 100.In 2, XR 100 has excellent miscibility, use before joining the slurry can be mixed evenly by hand using.3, crosslinking agent and the slurry will slowly hydrolyzed, mixture should be used within 1-3 days.4, such as mixture for a long time will appear:A ), slowly failure;B ), slurry viscosity tends to increase and may form a gel;In addition, C ) after adding a certain amount of XR 100 can make the cross-linking reaction is able to restore;End use:1, widely used in various printing mortar, water slurry / state slurry, the dosage is 0.5-3% ( by weight )2, can generally improve the printing paste in non-porous substrate adhesion, enhance the size tolerance.3, improved printing coating washing fastness, anti-sticking effect and high temperature resistance.Characteristic.In 1, XR a 100 crosslinking agent for printing paste for improve the fastness, wash resistance and anti-sticking effect is the other fixing agent 3 one 5 times.2, using the same process and slurry as a nylon or chemical fiber cloth printing. Trial of 1%XR 100 into slurry printed flower positions. At the same time, and then 3% other fixing agent printing another end of the cloth, dry pressing, to do all kinds of anti-sticking, fastness test, you'll find out XR 100 found that after the XR-100 effect is the other fixing agent 3-5 times.分享到